• Its cover can be easily mounted thanks to its special lock system. Mounting the modules on trays is pretty easy.
• Similar to in weak current installations, it is a cable carrier system in which the cables in high-voltage installations can be carried after the assembly offering reliable, easy, quick, mechanical and optical protection.
• The grounding of the snap-on (electrical continuity) is a substantial issue for data and telephone cables.
• The edges of the cable conduit are made of non-perforated metal that is curved inwards for the purpose of enhancing the strength and resistance.
• There are link clearances reducing the trans-resistance and grounding continuity on the joints of each straight length and turning module in EAE cable snap-on systems with cover. These links are available within the product range
• Safe and smooth edge design to protect the cable

Tks Cable Ladder

• They are made of 1.5 and 2mm pre-galvanized material. It can be painted as required. Height of 50 - 75 - 100 and 150mm and the Width is up to 50-75-100-150-200mm.
• Trunking cover cable snap-on systems are manufactured in 3 mr. for straight lengths as a standard.
• Sheet metal in thickness of 1.5 mm is used for snap-on 100x200 and 150x150 while sheet metal with a thickness of 1.2 mm is used for cabling with other dimensions.
• Straight length snap-on and turning modules are supplied with covers thereof.
• There are 3 locking points to secure the covers in straight lengths. There are 2 pcs. of locks on each locking point for the widths of 100, 150 and 200 and at least 1 pcs. of lock for the widths of 50 and 75 mm.
• TKS series Trunking Snap-on Cover has a special locking system. It is possible to lock by rotating the locking system by a quarter turn with ease. The latch located under the cover enables to secure the cover to the conduit with a quarter turn.